NEMA34 High Speed 8 N.m Closed Loop Stepper + Drivers + 10m Cables (Leadshine)

1. High Speed closed loop stepper motor CS-M23480 – 8 Nm  NEMA 34 with 1000-Line Encoder 14mm Shaft
2. Closed Loop Driver Model CS-D1008
3. Encoder 10 meters cable
4. Motor 10 meters cable

• 2 phase, NEMA 34 frame size
• 126 mm long
• 6 A phase current
• 8 N.m holding torque
• 14 mm shaft size
• Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder
• High precision, low motor heating, and low vibration
• Build with high quality materials including bearings and shaft made by Japanese manufacturers.
• This closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.

• Model: CS-M23480
• Frame Size: NEMA 34
• Phase: 2
• Step Angle: 1.8°
• Accuracy: ±0.9°
• Length: 126 mm (4.96 inch)
• Number of Wires: 4
• Holding Torque: 8N.m (1133 oz-in)
• Phase Current: 6 A/Phase
• Encoder Resolution: 1000 Line (4000 counts/per revolution)
• Voltage: 3.8 V
• Resistance: 0.63 Ω
• Inductance: 4 mH
• Rotor Inertia: 2.5 kg-cm2 (0.0354 oz-in-sec2 )
• Shaft Size: 14 mm (0.551 inch)
• Shaft Type: Single
• Weight: 3.5 kg (7.71 lb)
• Insolation Class: B
• Insolation resistance: Min 100 MΩ,500 VDC)
• Operating Temperature: -10 – 50°C (14 – 122°F)
• Temperature Rise (Max): 80K
• Radial Play: Max 0.02 mm with 450g load
• Axial Play: Max 0.08 mm with 900g load

2- Driver Features

• Step & direction or CW/CCW control modes
• Supply voltage of 20-80 VAC or 30-100 VDC, maximum output current of 8.0A
• Powering 2-phase stepper motor of NEMA 23, 24, 34, or 42 with 1000-line encoder
• Closed-loop, eliminates loss of steps
• No Tuning & No hunting
• No overshooting
• No torque margin
• Reduced motor heating and more efficient
• Smooth motion and super-low motor noise
• CE certified and RoHS compliant
• CS-D1008 Driver can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system.
• CS-D1008 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …